I am running:
Cisco IOS XE Software, Version 03.11.01.S - Standard Support Release
Cisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)
using license:
License Level: premium
License Type: Evaluation License
Next reload license Level: premium
Index 24 Feature: prem_eval
Period left: 8 weeks 3 days
License Type: Evaluation
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
The onePK status shows:
CSR#sh onep status
Status: enabled
Version: 1.1.0
Transport: tcp; Status: disabled
Transport: tls; Status: disabled
Transport: tipc; Status: running; Port: 15003
Session Max Limit: 10
CPU Interval: 0 seconds
CPU Falling Threshold: 0%
CPU Rising Threshold: 0%
History Buffer: Enabled
History Buffer Purge: Oldest
History Buffer Size: 32768 bytes
History Syslog: Disabled
History Archived Session: 0
History Max Archive: 16
Service Set: Base State: Enabled Version 1.1.0
Service Set: Vty State: Disabled Version 0.1.0
Service Set: OneFW State: Disabled Version 0.1.0
Service Set: Mediatrace State: Disabled Version 1.0.0
I would like to enable Transport: tcp, but I dont know how to.
The transport command is not recognized:
CSR(config)#onep
CSR(config-onep)#transport?
% Unrecognized command
CSR(config-onep)#?
ONEP configuration commands:
cpu CPU resource
default Set a command to its defaults
exit Exit from ONEP configuration mode
history One Platform History Trails
no Negate a command or set its defaults
service ONEP service set
session One Platform Session
Am I missing something?
Opened a discussion at
https://supportforums.cisco.com/thread/2270684
--update-
seems like a bad/unsupported VM image.
running a physical ISR c891 with special IOS for onePK works as intended.
No comments:
Post a Comment